Pitfalls in the sample preparation and analysis of N-acylethanolamines

N-acylethanolamines (NAEs) are a group of lipid mediators synthesized in response to a number of physiological and pathological stimuli. Because of the low tissue concentrations of NAEs, analyses often include liquid extraction followed by solid-phase extraction and subsequent quantitation by LC/MS or GC/MS. Reported levels of NAEs vary considerably, however, and often no explanation is given for these discrepancies. Brought on by difficulties encountered during method development, the effects of using four different brands of silica-containing solid phase extraction (SPE) columns and five different brands of chloroform for sample preparation were investigated. Considerable variation in the retention and recoveries of seven NAEs and 2-arachidonoylglycerol existed between the SPE columns. Furthermore, it was found that some chloroforms contained quantifiable amounts of N-palmitoylethanolamine and N-stearoylethanolamine. Finally, it was found that use of one of the chloroforms resulted in a loss of N-oleoylethanolamine from solution due to addition of chlorine to the ω-9 bond. The identity of this reaction product was confirmed by LC-MS/MS and NMR. It is recommended that these aspects of sample preparation and analysis should be thoroughly validated during method development and the relevant information on specific brands used be reported in future communications in order to better estimate the validity of reported quantitative data.     

Human Health Risk Assessment of Soils Contaminated with Metal(loid)s by Using DGT Uptake: A Case Study of a Former Korean Metal Refinery Site

The human health risk of soils contaminated with As, Pb, Cu, and Zn was evaluated based on pseudo-total concentrations of metal(loid)s, the physiologically based extraction test (PBET), and diffusive gradients in thin films (DGT). Non-carcinogenic (NCR) and carcinogenic (CR) risks exceeded the U.S. Environmental Protection Agency criteria under both the residential and non-residential scenarios. Human bioavailable concentrations (PBET) were much lower than pseudo-total concentrations. The Hazardous Index of NCR (HI (NCR)) for the PBET in the studied soils was 67% and 94% less than that for pseudo-total concentration, respectively, under the non-residential and residential scenarios. Similarly, CR for the PBET was also 65% and 93% less for the two soils. The concentration of metal(loid)s accumulated in the DGT resin was highly correlated with the PBET-extractable concentration (R² > 0.649). Therefore, for both the CR and HI (NCR), the DGT-calculated risk was linearly related to the PBET-calculated risk for the studied soils under both scenarios. The results suggest that DGT uptake and PBET-extracted concentrations are good surrogates for risk estimation and that both J1 and J2 soils require remediation before their use for residential or non-residential purposes.     

Critical threshold meal size and molt initiation in Rhodnius prolixus

The molting process and body growth in Rhodnius prolixus (Hemiptera: Reduviidae) (Ståhl, 1859) are significantly influenced by the availability and quality of food. Based on the body weight of each stage, the present study provides estimates of a potential critical weight threshold required for molt initiation in R. prolixus. In addition, a new measure given by the area under the weight curve is proposed, which encapsulates both body weight and time. It is shown that this measure is consistent with the data, and allows the estimation of a pre‐refractory period (i.e. the time interval between the moment at which the critical weight threshold is reached and the moment when no further meals are accepted). The present analysis estimates the critical weight threshold as 1.6, 5.3, 12.9, 42.0 and 97.0 mg for stages 1–5, respectively, whereas the values of the area under the curve threshold as 5, 16, 31.2, 159.7 and 329.9 mg days for stages 1–5, respectively. The results of the present study confirm the existence of a weight‐dependent mechanism for the initiation of molting in R. prolixus.     

Extraction and fractionation of complex lipid mixtures with dense carbon dioxide on a micro scale

The effects of pressure, temperature and some organic solvents on the recovery of various lipid classes from plant and animal tissues can be assessed by fractional extraction with dense carbon dioxide and consecutive analysis by thin-layer chromatography.     

Phallus impudicus loaded with γ-Fe2O3 as solid phase bioextractor for the preconcentrations of Zn(II) and Cr(III) from water and food samples

We investigated the application of fungus Phallus impudicus loaded γ-Fe₂O₃ nanoparticles as a biosorbent for magnetic solid phase extractions of trace levels of Zn(II) and Cr(III) ions from natural samples before their measurements by inductively coupled plasma optical emission spectrometry. The characterization of magnetized P. impudicus was performed using the scanning electron microscope, the energy dispersive X-ray and Fourier transform infrared spectroscopy. Important experimental factors were investigated. The experimental results fitted well to the Langmuir adsorption model and pseudo-second order kinetic model. Limit of detections of targeted ions by magnetic solid phase extraction method based on use of P. impudicus were found as 10.5 ngL⁻¹ and 12.6 ngL⁻¹ respectively for Cr(III) and Zn(II). The sorption capacities of the biosorbent were 22.8 mgg⁻¹ for Cr(III) and 25.6 mgg⁻¹ for Zn(II). The preconcentration factors were achieved as 100 for both of ions. RSDs for inter- and intraday precisions were found as lower than 2.0% and 2.1% respectively for both of targeted ions. The accuracy of the recommended process was tested by recovery measurements on the certificated reference materials and successfully applied for quantification recoveries of Cr(III) and Zn(II) ions from water and food samples.     

The Rise of Textured Perovskite Morphology: Revolutionizing the Pathway toward High‐Performance Optoelectronic Devices

Halide perovskite materials have achieved overwhelming success in various optoelectronic applications, especially perovskite solar cells and perovskite‐based light‐emitting diodes (P‐LEDs), owing to their outstanding optical and electric properties. It is widely believed that flat and mirror‐like perovskite films are imperative for achieving high device performance, while the potential of other perovskite morphologies, such as the emerging textured perovskite, is overlooked, which leaves plenty of room for further breakthroughs. Compared to flat and mirror‐like perovskites, textured perovskites with unique structures, e.g., coral‐like, maze‐like, column‐like or quasi‐core@shell assemblies, are more efficient at light harvesting and charge extraction, thus revolutionizing the pathways toward ultrahigh performance in perovskite‐based optoelectronic devices. Employing a textured perovskite morphology, the record of external quantum efficiency for P‐LEDs is demonstrated as 21.6%. In this research news, recent progress in the utilization of textured perovskite is summarized, with the emphasis on the preparation strategies and prominent optoelectronic properties. The impact of the textured morphology on light harvesting, carrier dynamic management, and device performance is highlighted. Finally, the challenges and great potential of employing these innovative morphologies in fabricating more efficient optoelectronic devices, or creating a new energy harvesting and conversion regime are also provided.     

Unifying Charge Generation,Recombination, and Extraction in Low‐Offset Non‐Fullerene Acceptor Organic Solar Cells

Even though significant breakthroughs with over 18% power conversion efficiencies (PCEs) in polymer:non‐fullerene acceptor (NFA) bulk heterojunction organic solar cells (OSCs) have been achieved, not many studies have focused on acquiring a comprehensive understanding of the underlying mechanisms governing these systems. This is because it can be challenging to delineate device photophysics in polymer:NFA blends comprehensively, and even more complicated to trace the origins of the differences in device photophysics to the subtle differences in energetics and morphology. Here, a systematic study of a series of polymer:NFA blends is conducted to unify and correlate the cumulative effects of i) voltage losses, ii) charge generation efficiencies, iii) non‐geminate recombination and extraction dynamics, and iv) nuanced morphological differences with device performances. Most importantly, a deconvolution of the major loss processes in polymer:NFA blends and their connections to the complex BHJ morphology and energetics are established. An extension to advanced morphological techniques, such as solid‐state NMR (for atomic level insights on the local ordering and donor:acceptor π? π interactions) and resonant soft X‐ray scattering (for donor and acceptor interfacial area and domain spacings), provide detailed insights on how efficient charge generation, transport, and extraction processes can outweigh increased voltage losses to yield high PCEs.     

绵马贯众多糖超声提取工艺优化及抗氧化活性分析

绵马贯众是中国传统常用中药,本研究以温度、时间、超声功率、液料比为影响因子,多糖得率为评价指标,通过响应面法优化超声辅助提取绵马贯众多糖的工艺条件,同时测定其基本理化性质及抗氧化活性。研究结果表明,绵马贯众多糖的最佳提取工艺条件为:温度64℃、时间60 min、超声功率210 W、液料比27 mL/g。此时多糖得率为9.57%,与预测值接近。理化性质分析表明绵马贯众多糖为含少量蛋白的酸性多糖。体外抗氧化研究表明绵马贯众多糖具有很强的DPPH自由基清除活性,IC50值为0.29 mg/mL;较好的羟基自由基清除活性,其IC50值为1.10 mg/mL;对DNA的氧化损伤有显著的保护作用。绵马贯众多糖可以作为一种潜在的抗氧化剂应用于食品和化妆品等领域。